Fig. 21: Fullness distribution controlled by the stepper motor (3)
(4) - Value range of additional fullness
(5) - Button minus/plus
To enter the value for additional fullness + :
1. Briefly press the button additional fullness for the
The window for the value range of additional fullness for the differen-
2. Use the minus/plus (5) button to adjust the value.
3. Press in a blank area.
The value is adopted and displayed to the user in the upper bar (7).
Fig. 22: Fullness distribution controlled by the stepper motor (4)
(8) - Number
(9) - Keyboard
32
④
⑤
⑥
for differential bottom feed
differential bottom feed (2)/additional fullness for
the differential top feed (3).
tial bottom feed (4)/the window for the value range of additional full-
ness for the differential top feed (6) opens.
⑧
⑨
(6) - Window of additional fullness
for differential top feed
(7) - Bar
(10) - Ok
(11) - new value
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Operation
⑦
⑪
⑩