Beisler 1280-7 Operating Instructions Manual page 208

Group Number
Information 9949
Information 9950
Information 9951
206
Description
No connection between control and
control panel
Control box software is not updated
Check Foot Pedal
Corrective
• Check plug connection of cable between
control panel and control box
• Replace cable between control box and
control panel
• Update the software of the control box
• Update the software of the control panel
• Change control box
• Change control panel
• Update Control box software
• Attention: Make sure that a pedal is connected
to the machine and activate pedal in machine
configuration 1.1.6.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Troubleshooting