Operation
Fig. 33: Operating the alternating stacker (2)
(9) - Quick Access Icons
(10) - Button Stacker mode for separating
(11) - Button Manual change between
You can open and change the stacker modes for separating (12) easily using
the quick access icons (9) on the control panel found on the main page.
Separating sewing material
To separate the sewing material:
1. Press the button Manual change between right/left (11).
The manual change between the position right/left is carried out
2. Press the button Stacker mode for separating (10).
The window for the stacker modes for separating (12) opens.
3. The stacker modes for separating (12) can be set to active/inactive as
The new settings are adopted automatically.
4. In Mode 2 (13), press into the submenu Change after x parts
The window containing the setting parameters (14) Separating
5. You can adjust as needed in the setting parameter (14) the number of
6. The new number is adopted automatically.
7. The sewing material can be removed directly from the delivery table (3)
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
⑨
⑩
⑪
right/left
once.
needed.
to the other side.
the parts after stacking opens.
parts after which the separation of the parts is supposed to take place.
of the alternating stacker (1).
⑫
⑬
⑤
(12) - Stacker modes for separating
(13) - Mode 2
(14) - Setting parameters
⑭
43