Beisler 1280-7 Operating Instructions Manual page 193

Setup
Fig. 153: Assembling the delivery table 1280 (2)
(1) - side delivery table
(2) - Holder
(3) - Bar
(4) - Bar
(5) - Double holder
To assemble the side delivery table:
1. Place the single holder (6) on the metal plate (7).
2. Tighten the screws (9).
3. Approaching from the direction of the sewing table, hold up the metal
4. Hold the metal plate (7) against it from the outer side.
5. Tighten the screws (10).
6. Slightly loosen the screws (11) in their respective holder (2), (5), and (6).
 You need to do this so that you can insert the corresponding bars (3)
7. Slide the bar (4) into the pull holder (6).
8. Slide the double holder (5) onto the bar (4).
9. Slide the bar (3) into the double holder (5).
10. Slide the delivery table (1) into the holder (2).
11. Check and, if necessary, correct the position of the bars (3) and (4).
12. Tighten the screws (12) in their respective holder (2), (5), and (6).
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
①
② ③ ④
bracket (8) on the table leg at the desired height.
and (4).
⑩
⑪
⑤ ⑥ ⑦
(6) - single holder
(7) - Metal plate
(8) - Metal bracket
(9) - Screws
(10) - Screws
(11) - Screws
⑩
⑨
⑧
191