Selection
92
Setting 1
1.2.1.6
Test differential
stepper motors
Test for the stepper motors for
differential top and bottom feeds.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Programming Commander Pro
Setting 2
1.2.1.6.1
Reference top
differential feed
e.g. reference run for step-
per motor (M2) NOT successfully
performed.
Check:
1. the proximity switch.
2. the distance to the reference
switch.
3. the run of the stepper motor.
OK
1.2.1.6.2
Reference bottom
differential feed
Reference run for stepper
motor (M1) successfully
performed.
OK
1.2.1.6.3 Calibration
factor top feed
Value range: 0-250
1.2.1.6.4 Calibration
factor bottom feed
Value range: 0-250
1.2.1.6.5 De-energize
stepper motors
Value range: ON/OFF