4. Press Ok.
The numerical value is stored, and the display returns to the previous
5. In seam section 1 (1), set the Fullness (9) to ON/OFF.
If the appearing field is blue, the function is enabled.
If the appearing field is gray, the function is disabled.
6. In seam section 1 (1), briefly press the numerical value for the Reduced
If the appearing field is blue, the function is enabled.
If the appearing field is gray, the function is disabled.
7. In seam section 1 (1), press and hold the numerical value for the
The integrated keyboard opens.
8. Enter the desired Speed (8) in the active field.
9. Press Ok.
The numerical value is stored, and the display returns to the previous
10. Repeat the steps 1-9 for each seam section 1-5 (1).
The parameters can be adjusted separately for each seam
11. Press on the symbol
This opens the program parameters page.
144
user interface.
Speed (8).
Reduced Speed (8).
user interface.
section 1-5 (1).
Programming Commander Pro
.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023