Beisler 1280-7 Operating Instructions Manual page 149

Programming Commander Pro
11. In seam section 1 (1), press and hold the numerical value for the
 The integrated keyboard opens.
12. Enter the desired Speed (9) in the active field.
13. Press Ok.
 The numerical value is stored, and the display returns to the previous
14. Briefly press the differential top feed increment value (3).

15. Enter the desired differential top feed increment value (3)
16. Press Ok.
 The numerical value is stored, and the display returns to the previous
17. Repeat the steps 1-16 for each seam section 1-5 (1).
 The parameters can be adjusted separately for each seam
 It is possible for each seam section 1-5 (1) to turn the differen-
18. Press on the symbol
 This opens the program parameters page.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Reduced Speed (8).
user interface.
The integrated keyboard opens.
in the active field.
user interface.
section 1-5 (1).
tial top feed increment value (3) ON/OFF separately via
Fullness + (11).
.
147