Beisler 1280-7 Operating Instructions Manual page 20

Fig. 4: Threading diagram (2)
(4) - Edge guide in initial position
(5) - Suction hose
Disturbance
You will not be able to open the cover (7) if the pneumatic edge guide is
in its initial position (4). You can briefly disconnect the compressed air
supply ( p. 19) to manually move the edge guide (8) towards the sewing
foot.
4. Slide the cover (7) to the right (6).
5. The cover (7) opens towards the bottom.
Fig. 5: Threading diagram (3)
(8) - Edge guide
6. The threading diagram (9) for the machine head is shown on the inside
 The types of stitches are grouped by colors.
18
④
⑧
of the cover (7).
⑦
⑥
(6) - Slide to the right
(7) - Cover
(9) - Threading diagram
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Operation
⑤
⑨