Operation
11. Keep the pedal depressed until the machine switches to automatic sew-
Fig. 60: Operating the workstation 1280-7 (5)
(2) - Sewing pieces
(8) - right hand
12. If necessary, keep guiding the sewing pieces (2) with your right
13. Release the sewing pieces (2).
14. The transport station (9) ( p. 50) lowers during the sewing process
15. The puller (11) in the transport station (9) lowers.
To keep the sewing pieces (2) from slipping.
To support the feed of the sewing pieces (2).
16. The roll-out device (10)/holding stamp in the transport station (9)
To ensure reliable chain cutting.
To transport the sewing pieces (2) away from the sewing area and
17. The finished sewing pieces (2) are stacked ( p. 39).
18. Manually remove the pieces from the stacker.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
ing start. You can program the length of the seam section ( p. 70).
②
⑧
⑨
⑩
⑪
hand (8).
(depending on the equipment, with holding stamp/puller with roll-out
device).
lowers.
to the stacker.
(9) - Transport station
(10) - Roll-out device
(11) - Puller
65