Beisler 1280-7 Operating Instructions Manual page 51

Operation
Adjusting the air supply using the throttle valve in the fabric sliding
plate
Fig. 41: Adjusting the air supply intensity (3)
(8) - Throttle valve
(9) - Table air nozzle
(10) - Fabric sliding plate
The table air nozzle (9) in the fabric sliding plate is adjusted separated via
the throttle valve (11) found under the fabric sliding plate (10). The air noz-
zle in the contour guide (14) is adjusted to match this setting via the throttle
valve (8).
To adjust the air supply intensity using the throttle valve under the fabric
sliding plate:
1. Disassemble the fabric sliding plate (10).
2. Loosen the screw (12).
3. Turn the throttle valve (11).
4. Tighten the screw (12).
To adjust the air supply intensity using the throttle valve in the contour
guide:
1. Loosen the screw (13).
2. Turn the throttle valve (8).
3. Tighten the screw (13).
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
⑪
⑫
• Blowing air more intense: Turn clockwise
• Blowing air less intense: Turn counterclockwise
• Blowing air more intense: Turn clockwise
• Blowing air less intense: Turn counterclockwise
⑩ ⑨
⑬
(11) - Throttle valve
(12) - Screw
(13) - Screw
(14) - Air nozzle in the contour guide
⑧
⑭
49