Table of Contents
Advertisement
Programming Commander Pro
1. Status bar (1) ( p. 74)
2. Sequence bar (2)
3. Sewing graphics (3)
4. You can customize the quick access panel (4) per sequence and swipe
Fig. 72: Navigating the Commander Pro control panel (2)
(5) - Program sequence
(6) - Active program
(7) - Red arrow
(8) - Sewing material
Displayed in the sequence bar (2) is the program sequence (5) of the cur-
rent sequence. The active program (6) is always highlighted in bold and
displayed as a red seam (9) next to the sewing graphics (3) immediately
on the sewing material (8). The red seam (9) in the sewing graphics (3)
changes along with each program change in the program sequence (5).
The red arrow (7) indicates the sewing direction.
The quick access panel (4) holds the tiles (10) that are used to change the
program parameters. They can be customized and grouped across 3 pag-
es (11) and 27 placeholders ( p. 157). The blue dot indicates the active
page (11).
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
across its 3 pages from the right to the left.
⑥
⑦
⑧
⑤
⑨
(9) - Red seam
(10) - Tiles
(11) - Pages
⑪
⑩
73
Advertisement
Table of Contents
