Setup
Fig. 141: Adjusting the working height (2)
(3) - Screws
Fig. 142: Adjusting the working height (3)
(3) - Screws
To adjust the working height:
1. Loosen the screws (3) on the stand bars.
2. Adjust the tabletop to the desired height.
Important
Pull out or push in the tabletop evenly at both sides to prevent it from
jamming.
3.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
③
(Example: 1281)
Tighten the screws (3).
③
③
183