Beisler 1280-7 Operating Instructions Manual page 97

Programming Commander Pro
Selection
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Setting 1
1.2.2.3
RAM test
Memory chip analysis.
E.g. to identify a defective RAM
module.
Setting 2
Y17 Edge guide
Y18 Transport unit
Y19 Contour guide
Move sideways
Y20 Move contour guide
forwards and backwards
Y21 Mouse station back
Y26 Move stacker table
sideways
Laser marking lamp
Value range: ON/OFF
Function is selected/deselected
directly in the grid.
1.2.2.2.1 Grid view
Select one / multiple functions in
grid view.
All functions are executed
once at the same time.
1.2.2.2.4 Auto on
All functions are repeated con-
tinuously at the same time.
1.2.2.2.2 Reset
The grid is empty again.
Press
Display of grid view returns to
list view
RAM test result
E.g. reference run for stepper
motor (M1) successfully
performed.
OK
95