Beisler 1280-7 Operating Instructions Manual page 123

Programming Commander Pro
To copy parameters:
1. Press the program (1) you wish to copy in the active tab (2) All
 The program (1) is activated.
2. Press on the symbol
 A user interface opens showing the program overview with all
 In grid view (4), only the program number (5) is visible (see table
Fig. 99: Copying program parameters (2)
(3) - Symbol List View
(4) - Grid view
3. The symbol List View (3) allows the user to switch to list view.
 The list view (6) shows the program number (5), the name and
4. The symbol List View (7) allows the user to return to grid view (4).
5. Select one/multiple programs (5) and press OK.
 A warning notice reading
6. Press Cancel /Copy Parameters.
 Cancel: the user returns to the user interface Program parameters.
 Copy Parameters: a warning notice appears reading
7. Confirm with OK.
 The parameters have been copied.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
Programs.
200 programs in grid view (4).
Color indicators in grid view).
③
④
the sewing graphics.
All parameters and names of the program(s) would be
changed as per program (e.g. P51) and cannot be
recalled!
Copied- Successfully Copied.
.
⑦
⑤ ⑥
(5) - Program number
(6) - List view
(7) - Symbol Grid View
Kindly confirm Copy! appears.
121