11. In seam section 1 (1), press and hold the numerical value for the
The integrated keyboard opens.
12. Enter the desired Speed (9) in the active field.
13. Press Ok.
The numerical value is stored, and the display returns to the previous
14. Briefly press the differential bottom feed increment
15. Enter the desired differential bottom feed increment
16. Press Ok.
The numerical value is stored, and the display returns to the previous
17. Repeat the steps 1-16 for each seam section 1-5 (1).
The parameters can be adjusted separately for each seam
It is possible for each seam section 1-5 (1) to turn the differen-
18. Press on the symbol
This opens the program parameters page.
142
Reduced Speed (8).
user interface.
value (3).
The integrated keyboard opens.
value (3) in the active field.
user interface.
section 1-5 (1).
tial bottom feed increment value (3) ON/OFF separately
via Fullness + (11).
Programming Commander Pro
.
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023