Rear Shock Absorbers Adjustment - APRILIA RS 660 2020 Manual

After refuelling:
•
The cap can only be closed if the key (2) is inserted.
•
Once the key (2) is inserted, press the cap to close it again.
•
Remove the key (2).
•
Close the cover (1).
MAKE SURE THE CAP IS TIGHTLY CLOSED.

Rear shock absorbers adjustment (03_04, 03_05, 03_06, 03_07,

03_08, 03_09)
The rear suspension consists of a spring-shock absorber unit connected to the frame
by uniball joints.
To adjust the setting, the shock absorber has an adjuster screw (1) for adjusting the
rebound hydraulic braking, a ring nut for adjusting the spring pre-load (2) and a locking
ring nut (3).
CAUTION
CARRY OUT MAINTENANCE OPERATIONS AT HALF THE INTERVALS RECOM-
MENDED IF THE VEHICLE IS USED IN WET OR DUSTY AREAS, OFF ROAD OR
FOR SPORTING APPLICATIONS.
CHECK AND IF NECESSARY, ADJUST THE REAR SHOCK ABSORBER.
THE STANDARD REGULATION OF THE REAR SHOCK ABSORBER IS INTEN-
DED TO SATISFY NORMAL TOUR DRIVING CONDITIONS.
IN ANY CASE IT IS POSSIBLE TO INSERT PERSONAL SETTINGS, DEPENDING
ON VEHICLE UTILIZATION.
03_04
111