If Output Settings - Safran RTR-NeXt User Interface Manual

4.7.17

IF Output Settings.


Source IF Output
This is the reconstructed IF output available on J14. This output is mainly used as the combined IF
output.

CH1 IF is available on J12.

CH2 IF is available on J13.
Note : it is possible to switch the 70 MHz signal from the RTR test generator with any of the
modulations available (First select the required demodulation).
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.: -
Date: 21/06/2021
Safran Data Systems
.
Page 148