Special Warnings And Information; Equipment Used In Hazardous Locations - Ametek 241CE II User Manual

Special Warnings and Information

Equipment Used in Hazardous Locations

See Chapter 5 – Specifications for details about the suitability of this equipment in haz-
ardous locations. This analyzer must not be commissioned until a person trained in the
area of evaluating equipment for use in hazardous classified locations has confirmed
that this equipment and its installation are in compliance with the requirements for
the area.
All input and output wiring must be in accordance with wiring methods authorized
for the area classification by the authority having jurisdiction. Ex d glands or stopping
boxes (seals) must be installed on flameproof enclosures.
xii | 241CE II Hydrocarbon Dewpoint Analyzer
Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been
Switched Off or the Area is Known to be Non-Hazardous.
Risque d'explosion – Avant de déconnecter l'équipement, coupez le courant où
vous assurez que l'emplacement est designé non dangereux.
PN 903-8797, Rev A