Table of Contents
Advertisement
SPECIAL WARNINGS AND INFORMATION
EQUIPMENT USED IN CLASS I, DIVISION 2 HAZARDOUS LOCATIONS
Explosion Hazard - Substitution of Components May Impair Suitability for Class I, Division
2.
!
WARNING
Risque d'explosion - La substitution de composants peut rendre ce materiel inacceptable pour
!
les emplacements de Classe I, Division 2.
Avertissement
Refer to the "Safety Critical Components" in the Spare Parts list in
section 7 of this manual.
Explosion Hazard - Do Not Disconnect Equipment Unless Power Has Been Switched Off or
!
the Area is Known to be Non-Hazardous.
WARNING
Risque d'explosion - Avant de déconnecter l'équipement, coupez le courant où vous assurez
!
que l'emplacement est designé non dangereux.
Avertissement
All input and output wiring must be in accordance with Class I, Division 2 wiring methods (NEC
Sec 501.4(b) or CEC 18-152) (UL1604/CSA#213) and in accordance with the authority having
jurisdiction.
Dryer Warning
When removing and installing dryers, please follow all handling guidelines provided in the
!
MSDS (located in the back of the manual). When shipping the analyzer with the dryers in-
stalled, consult the MSDS for appropriate shipping information and instructions.
WARNING
| ix
Advertisement
Table of Contents
