SPECIAL WARNINGS AND INFORMATION FOR EQUIPMENT USED
IN HAZARDOUS LOCATIONS
This Equipment is Suitable for Use in Class I, Division 2, Groups ABCD or Non-Hazardous Areas
Only.
!
Warning - Explosion Hazard - Substitution of Components May Impair Suitability for Class I, Division 2.
WARNING
AVERTISSEMENT - RISQUE D'EXPLOSION - LA SUBSTITUTION DE COMPOSANTS
!
PEUT RENDRE CE MATERIEL INACCEPTABLE POUR LES EMPLACEMENTS DE
Avertisse-
CLASSE I, DIVISION 2
ment
!
Warning - Explosion Hazard - Do Not Disconnect Equipment Unless Power Has Been Switched
Off or the Area is Known to be Non-Hazardous
WARNING
!
AVERTISSEMENT - RISQUE D'EXPLOSION - AVANT DE DECONNECTER
L'EQUIPEMENT, COUPER LE COURANT OU S'ASSURER QUE L'EMPLACMENT EST
Avertisse-
DESIGNE NON DANGEREUX.
ment
Warning - If This Equipment is to Be Operated in a Class I Div 2 area, the Use of the External
!
12 Vdc Power Input Option is Strictly Prohibited.
WARNING
!
AVERTISSEMENT - SI CET EQUIPEMENT EST UTILISE EN ZONE CLASSE I, DIVISION
2, L'UTILISATION DE L'OPTION "EXTERNE 12 VDC" EST ABSOLUMENT INTERDITE.
Avertisse-
ment
When the Controller Unit is to be Operated in a Hazardous Location, the "Alarm Relay Output"
Feature is Acceptable for Switching External Circuits Having a Class I, Div 2, Groups ABCD Non-
Incendive Output.
The Power Cord Supplied with the Analyzer is Suitable for Flexible Haz-ardous Location Connec-
tion. The Mains Plug must be of the Locking and Grounding type.
Contents | ix