SPECIAL WARNINGS AND INFORMATION
Equipment Used in Zone 1 Hazardous Locations
Refer to Chapter 2 – Specifications for details about the suitability of this equipment in
hazardous areas.
All input and output wiring must be in accordance with Zone 1 wiring methods and
in accordance with the authority having jurisdiction.
viii | 5100HD Zone 1 – X-Purge
Explosion Hazard – Substitution of components may impair suitability for
hazardous locations.
Risque d'explosion – La substitution de composants peut rendre ce materiel
inacceptable pour les emplacements sont designés dangereux.
Explosion Hazard – Do not disconnect equipment unless power has been
switched off or the area is known to be non-hazardous.
Risque d'explosion – Avant de déconnecter l'équipement, coupez le courant où
vousassurez que l'emplacement est designé non dangereux.