Special Warnings and Information
Equipment Used in Class I, Division 2 Hazardous Locations
Refer to the "Safety Critical Components" in the Spare Parts list in Chapter 4 of this
manual.
All input and output wiring must be in accordance with Class I, Division 2 wiring meth-
ods (NEC Sec 501.4(b) or CEC 18-152) (UL1604/CSA#213) and in accordance with the
authority having jurisdiction.
Dryer Warning
PN 305804902, Rev A
Explosion Hazard – Substitution of Components May Impair Suitability for
Class I, Division 2.
AVERTISSEMENT – Risque d'explosion – La substitution de composants peut
rendre ce materiel inacceptable pour les emplacements de Classe I, Division 2.
Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been
Switched Off or the Area is Known to be Non-Hazardous.
AVERTISSEMENT – Risque d'explosion – Avant de déconnecter l'équipement,
coupez le courant où vous assurez que l'emplacement est designé non dan-
gereux.
When removing and installing dryers, please follow all handling guidelines
provided in the MSDS (located in the back of the manual). When shipping the
analyzer with the dryers installed, consult the MSDS for appropriate shipping
information and instructions.
Contents | xi