Responding To A Fault; Faults - Steris Reliance EPS Endoscope Processing System Operator's Manual

4.13 Responding to a

4.13.1 Faults

WARNING –
PROCESS HAZARD: Endoscopes
and accessories
adequately processed, rinsed
and air purged
processing cycle is aborted.
REPROCESS LOAD.
Processing Instructions
Fault messages warn operator if the processor is experiencing an
Fault
abnormal condition. Fault conditions can be caused by failure of
utility supplies or by processor components.
Refer to S
alarms.
NOTE: Some fault conditions can be solved by the operator.
When a malfunction or fault occurs before the cycle is successfully
completed:
1. An alarm sounds and display shows:
INEFFECTIVE
alternating with:
are not
when
and printer records:
2. Press ALARM REPLY touch pad to acknowledge alarm. This
will record time at which operator acknowledged alarm. Printer
records:
If FAULT alarm requires no further action (for example, refer to
S
has been able to solve the fault condition using S
T
3. Press START touch pad to resume cycle operation. Display
shows:
Operator Manual
7.2, F
ECTION AULT
CYCLE DELAYED
SEE FAULT CHART
CYCLE DELAYED
=========================
HH:MM:SS XM
=========================
=
=========================
=======================
HH:MM:SS XM
=======================
ALARM ACKNOWLEDGED
=======================
7.3, M
ECTION AINTENANCE
, display shows:
ROUBLESHOOTING
START TO RESUME
STOP TO CANCEL
OPERATING
C , for a detailed listing of fault
HART
FAULT XX
MM-DD-YY
FAULT XX =
MM-DD-YY
D A C ), or if the operator
UE LARM HART
MMM MIN
7,
ECTION
4-47
920011-649