Maintenance Due Faults - Steris Reliance EPS Endoscope Processing System Operator's Manual

4.13.2 Maintenance Due
Processing Instructions
When Abort sequence is completed, display shows:
and printer records:
IMPORTANT: If a recurring alarm occurs that prevents the Abort
sequence from being completed, call STERIS.
There are four MAINTENANCE DUE alarms indicating when specific
Faults routine maintenance needs to be performed on the processor.
1. When a MAINTENANCE DUE alarm occurs, display shows:
alternating with:
and printer records:
2. Press ALARM REPLY touch pad to acknowledge alarm. Display
shows:
NOTE: For MAINTENANCE DUE alarms, refer to S
M
AINTENANCE
maintenance alarms. If maintenance is not performed on
processor, MAINTENANCE DUE alarm will be displayed every
24 hours as long as maintenance is not performed and counter is
not reset.
Operator Manual
CYCLE CANCELLED
READY TO UNLOAD
==========================
CYCLE CANCEL HH:MM:SS: XX
==========================
MAINTENANCE DUE
MAINTENANCE XX
SEE CHART
=========================
HH:MM:SS XM MM-DD-YY
=========================
= MAINTENANCE XX
=========================
READY
MM-DD-YY HH:MM XM
D A C
UE LARM HART
, for a detailed listing of
=
7.3,
ECTION
4-49
920011-649