Changing Printer Ribbon And Paper Roll; Figure 6-5. Printer - Steris Reliance EPS Endoscope Processing System Operator's Manual

6.9 Changing Printer
Ribbon and Paper Roll
6-12
920011-649
See Figure 6-5.
For procedures on how to replace printer paper roll and ribbon
cartridge, refer to the printer User's Manual.
Keep printer User's Manual in an easily accessible place along with
other documentation for Reliance EPS.
IMPORTANT: The use of STERIS paper and ribbon cartridge is
recommended. Using non-STERIS paper and cartridge can result in
defects or other problems and can void the warranty. For information
on paper and cartridge to be used, refer to S
S P C
PARE ARTS AND ONSUMABLE
IMPORTANT: Do not change printer DIP switch settings. DIP
switches have been factory-set by STERIS to enable data
communication between printer and processor. If printer does not
work properly, see S
ECTION
Operator Manual
ECTION
P .
RODUCTS
7, T
ROUBLESHOOTING

Figure 6-5. Printer

8, R
ECOMMENDED
.
Routine Maintenance