No Rf / Gps Data - R&S TSMA6 Series User Manual
Autonomous mobile network scanner
Hide thumbs
Also See for TSMA6 Series:
- User manual (190 pages) ,
- Getting started (51 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
®
R&S
TSMA6
8.7 No RF / GPS Data
1. Check if the RF antenna is connected to the RF port.
Figure 8-4: RF Antenna Connector
1 = RF port
2. Check if the GPS antenna is connected to GPS antenna input.
Figure 8-5: GPS Antenna Connector
1 = GPS antenna connector
Note: Only use the GPS antenna included in the scope of delivery.
3. Check if the LEDs indicate an error (see
on page 93).
4. Open the web GUI (Internet Explorer, URL: http://localhost) and change the "Mode
of Operation" to "PC Mode".
5. Start the "TSME Device Manager" via the Windows "Start" menu.
"Start > All Programs > TsmeTools > TsmeDeviceManager"
Check if there are any error messages in the "TSME Device Manager".
●
●
User Manual 4900.8057.02 ─ 06
If errors are reported in the "Device Analysis Output" window, follow the instruc-
tions.
If no errors are reported or if the repair actions via the "Device Analysis Output"
window fail, contact the R&S support.
Chapter 8.1, "LED Indicated
Troubleshooting
No RF / GPS Data
Errors",
104
Advertisement
Table of Contents
