Ntp Server - NetModule NB3710 User Manual

NB3710
User Manual for NRSW version 4.4

5.7.4. NTP Server

This section can be used to individually configure the Network Time Protocol (NTP) server function.
HOME INTERFACES
SDK
Administration
Job Management
Testing
DHCP Server
DNS Server

NTP Server

Dynamic DNS
E-mail
Events
SMS
SSH/Telnet Server
SNMP Agent
Web Server
Softflow
Discovery
Redundancy
Voice Gateway
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
The following settings for each interface can be applied then:
Parameter
Administrative status
Poll interval
Allowed hosts
For setting the system time of the device see 5.8.1.
ROUTING FIREWALL VPN SERVICES
NTP Server Administration
Administrative status:
NTP Server Configuration
Poll interval:
Allowed hosts:
Apply
Figure 5.41.: NTP Server
NTP Server Settings
Specifies whether the NTP server is enabled or not
Defines the polling interval (64..2048 seconds) for synchronizing the
time with the master clock servers
Defines the IP address range which is allowed to poll the NTP server
141
SYSTEM
enabled
disabled
256 seconds
192.168.1.0
Address:
255.255.255.0
Netmask:
LOGOUT