Openvpn Configuration - NetModule NB3710 User Manual

NB3710
User Manual for NRSW version 4.4
Tunnel Configuration
NetModule routers support one single server tunnel and up to four client tunnels. You can specify
tunnel parameters either in standard configuration or upload an expert mode file which has been
created in advance. Refer to chapter
the files.
HOME INTERFACES
OpenVPN
Administration
Tunnel Configuration
Client Management
IPsec
Administration
Tunnel Configuration
PPTP
Administration
Tunnel Configuration
Client Management
GRE
Administration
Tunnel Configuration
L2TP
Administration
Tunnel Configuration
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
Parameter
Operation mode
Multipath TCP
5.6.1 to learn more about how to manage clients and generate
ROUTING FIREWALL VPN SERVICES
Tunnel 1 Tunnel 2
OpenVPN Tunnel 1 Configuration
Operation mode:
Server port:
Type:
Protocol:
Network mode:
Cipher:
Authentication:
Options:
Apply Erase
Figure 5.29.: OpenVPN Configuration
OpenVPN Configuration
Specifies whether client or server mode should be used for this tunnel,
it further specifies if tunnel shall be configured in a standard way or if
an expert mode file shall be used.
Enables OpenVPN mulipath TCP support
109
SYSTEM
Tunnel 3 Tunnel 4
disabled
standard
client
expert
server
1194
TUN
UDP
routed
MTU:
bridged
AES-256-CBC
certificate-based
SHA256
HMAC digest:
root certificate, server certificate and server key are missing
Manage keys and certificates
use compression redirect gateway
use keepalive allow duplicates
LOGOUT
verify certs
Download