NetModule NB3710 User Manual page 83

NB3710
User Manual for NRSW version 4.4
When running the serial port as AT modem emulator the following settings can be applied:
Parameter
Physical protocol
Baud rate
Hardware flow control
Parameter
Port
Parameter
Number
IP address
Port
Serial Port Settings
Selects the desired physical protocol on the serial port
Specifies the baud rate run on the serial port
You may enable RTS/CTS hardware flow control, so that the RTS and
CTS lines are used to control the flow of data
Incoming connections via Telnet
The TCP port for the device server
Phonebook Entries
Phone number that will get an alias
IP address the number will become
Port value for the IP address
83