Pptp Tunnel Configuration - NetModule NB3710 User Manual

NB3710
User Manual for NRSW version 4.4
HOME INTERFACES
OpenVPN
Administration
Tunnel Configuration
Client Management
IPsec
Administration
Tunnel Configuration
PPTP
Administration
Tunnel Configuration
Client Management
GRE
Administration
Tunnel Configuration
L2TP
Administration
Tunnel Configuration
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
Setting up a server requires the following settings:
Parameter
Listen address
Server address
Client address range
ROUTING FIREWALL VPN SERVICES
Tunnel 1 Tunnel 2
PPTP Tunnel 1 Configuration
Operation mode:
Server listen address:
Server address:
Client address range:
Username:
Password:
Apply
Figure 5.34.: PPTP Tunnel Configuration
PPTP Server Settings
Specifies on which IP address should be listened for incoming client
connections
The server address within the tunnel
Specifies a range of IP addresses assigned to each client
121
SYSTEM
Tunnel 3 Tunnel 4
disabled
client
server
ANY
specify
192.168.250.1
192.168.250.10 to 192.168.250.13
admin
••••••••
LOGOUT