Resetting System; Rebooting System; Running Shell Commands; Working With History - NetModule NB3710 User Manual

NB3710
User Manual for NRSW version 4.4

6.13. Resetting System

The reset command can be used to reset the router back to factory defaults.
> reset h
Usage :
reset [ h ]

6.14. Rebooting System

The reboot command can be used to reboot the router.
> reboot h
Usage :
reboot [ h ]

6.15. Running Shell Commands

The shell command can be used to execute a system shell and run any arbitrary application or script.
> shell h
Usage :
shell [ h ] [ < cmd > ]

6.16. Working with History

The history command will print the list of entered commands on a per-user basis.
> history h
Usage :
history [ c ]
It can be cleared by history -c.

6.17. CLI-PHP

CLI-PHP, the HTTP frontend to the CLI application, can be used to configure and control the router
remotely. It is enabled in factory configuration, thus can be used for deployment purposes, but disabled
as soon as the admin account has been set up.
The service can later be turned on/off by setting the cliphp.status configuration parameter:
cliphp . status=0
cliphp . status=1
This section describes the CLI-PHP interface for Version 2. It accepts POST and GET requests.
Service is disabled
Service is enabled
197