Ntp Server - NetModule NB3710-LWA User Manual

5.7.4. NTP Server

This section can be used to individually configure the Network Time Protocol (NTP)
server function.
The following settings for each interface can be applied then:
Parameter
Administrative status
Poll interval
Allowed hosts
For setting the system time of the device see 5.8.1.
NB3710 User Manual 3.8
Figure 5.41.: NTP Server
NTP Server Settings
Specifies whether the NTP server is enabled or not
Defines the polling interval (64..2048 seconds) for synchro-
nizing the time with the master clock servers
Defines the IP address range which is allowed to poll the

NTP server

114