Regional Settings - NetModule NB3710 User Manual

NB3710
User Manual for NRSW version 4.4
Bootloader
The following bootloader parameters can be set:
Parameter
Password
Time & Region
This page can be used for setting the system time and configuring the time zone. You may further
enable daylight saving changes for your specific time zone. NetModule routers can synchronize their
system time by using one or more servers by the help of the Network Time Protocol (NTP) or via GNSS.
If enabled, the time synchronization is usually triggered after a WAN link has come up but before
starting any VPN connections. Further time synchronization cycles are scheduled in background.
Most routers don't have a battery backed clock (RTC). In this case the system time is set during boot
to the last valide time, e.g. before power off.
HOME INTERFACES
System
Settings
Time & Region
Reboot
Authentication
User Accounts
Remote Authentication
Software Update
Software Update
Modem Firmware Update
Software Profiles
Configuration
File Configuration
Factory Configuration
Troubleshooting
Network Debugging
System Debugging
Tech Support
Keys & Certificates
Licensing
Legal Notice
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
Bootloader Settings
The password used to unlock the bootloader. If empty, the admin
password will be used.
ROUTING FIREWALL VPN SERVICES
System Time
Current system time:
Time Synchronisation
Primary NTP server:
Secondary NTP server:
Preferred NTP server:
Ping check:
Sync time from GNSS:
Time Zone
Time zone:
Daylight saving changes:
Apply Sync
Figure 5.51.: Regional settings
169
SYSTEM
2020-01-09 02:03:05 Set time
0.pool.ntp.org
1.pool.ntp.org
Primary NTP Server
enabled
UTC+01:00 Zurich
LOGOUT