NetModule NB3800 Series Quick Start Manual

1
6
7
1

Status LED

2

Reset button

3

SIM cover

www.netmodule.com
8
Status indicator.
— Status blinking: The device is busy due to startup, soft-
ware or configuration update.
— Status on: The device is ready.
Press at least 3 seconds for reboot and at least 10 seconds
for a factory reset. The start of the factory reset is confir-
med by all LEDs lighting up for a second. The button must
be released then again.
Removing the SIM cover: Loosen the screws and flip over
the SIM cover until the SIM card slots are completely free.
2 3 4
Please close the cover after
inserting a SIM card and
tighten the screws again.
30.12.2019 © NetModule AG | Errors reserved
Quick Start Guide Enclosure
NB3800
5
9