NetModule NB3710 User Manual page 70

NB3710
User Manual for NRSW version 4.4
This section can be used to configure security-related settings.
Parameter
SSID
Security mode
WPA/WPA2 mixed mode
WPA cipher
Identity
Passphrase
Force PMF
Hide SSID
Isolate clients
Band steering master
Accounting
The following security modes can be configured:
Parameter
Off
None
WEP
WPA-PSK
WPA-RADIUS
WPA-TLS
WLAN Access-Point Configuration
The network name (called SSID)
The desired security mode
WPA2 should be preferred over WPA1, running WPA/WPA2 mixed-
mode offers both.
The WPA cipher to be used, the default is to run both (TKIP and
CCMP)
The identity used for WPA-RADIUS and WPA-EAP-TLS
The passphrase used for authentication with WPA-PSK, otherwise the
key passphrase for WPA-EAP-TLS
Enables Protected Management Frames
Hides the SSID
Disables client-to-client communication
The WLAN interface which the client should be steered to
Sets accounting profile
WLAN Security Modes
SSID is disabled
No authentication, provides an open network
WEP (is nowadays discouraged)
WPA-PSK (TKIP, CCMP) aka WPA-Personal/Enterprise, provides
password-based authentication
EAP-PEAP/MSCHAPv2, can be used to authenticate against a re-
mote RADIUS server which can be configured in chapter
EAP-TLS, performs authentication using certificates which can be
configured in chapter 5.8.8
70
5.8.2