Can Port Specification; Pin Assignments Of Can Port Signals (Ep1 / Ep2) - NetModule NB3710 User Manual

NB3710
User Manual for NRSW version 4.4
CAN Port Specification (Option C)
The CAN port has the following specification:
Feature
Protocol
Speed
Galvanic isolation to enclosure
Internal bus termination
External bus termination
Max. cable length
Cable shield
Cable type
Max. number of nodes
Reactionless
Table 3.26.: Pin Assignments of CAN Port Signals (EP1 / EP2)
2
Note: On each end of the CAN bus is a 120 Ω termination mandatory
Specification
CAN V2.0B
Up to 1 Mbit/s
Default: 125 kbit/s
1500 V
none
2
120 Ω
100 m
mandatory
twisted pair
110
Option Cb: CAN-Passive (monotioring only)
Option Ca: CAN-Active (rx and tx enabled)
Table 3.25.: CAN Port Specification
EP Pins Signal
1 / 5 GND
2 / 6 L
3 / 7 H
4 / 8
DC
32