Usb Device Management - NetModule NB3710 User Manual

NB3710
User Manual for NRSW version 4.4
USB Devices
This page show the currently connected devices and it can be used to enable a specific device based
on its Vendor and Product ID. Only enabled devices will be recognized by the system and raise addi-
tional ports and interfaces.
HOME INTERFACES
WAN
Link Management
Supervision
Settings
Ethernet
Port Setup
VLAN Management
IP Settings
Mobile
Modems
SIMs
Interfaces
WLAN
Administration
Configuration
IP Settings
Bridges
USB
Serial
Digital I/O
GNSS
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
Parameter
Vendor ID
Product ID
Module
Any ID must be specified in hexadecimal notation, wildcards are supported (e.g. AB[0-1][2-3] or AB*)
A USB network device will be referenced as LAN10.
ROUTING FIREWALL VPN SERVICES
Administration Devices
Connected USB Devices
Vendor ID Product ID Bus ID
Enabled USB Devices
Vendor ID Product ID Bus ID
Refresh
Figure 5.16.: USB Device Management
USB Devices
The USB Vendor ID of the device
The USB Product ID of the device
The USB module and type of driver to be applied for this device
77
SYSTEM
Autorun
Manufacturer Device
Module Type
LOGOUT
Type
Attached