Ntp Server - NetModule NB3000-Line-Hd User Manual

5.7.4. NTP Server

This section can be used to individually con gure the Network Time Protocol (NTP) server
function.
The following settings for each interface can be applied then:
Parameter
Administrative status
Poll interval
Allowed hosts
For setting the system time of the device see 5.8.1.
NB3000-Line-Hd User Manual 4.2
Figure 5.41.: NTP Server
NTP Server Settings
Speci es whether the NTP server is enabled or not
De nes the polling interval (64..2048 seconds) for synchroniz-
ing the time with the master clock servers
De nes the IP address range which is allowed to poll the NTP
server
128