Automatic File Configuration - NetModule NB3710 User Manual

NB3710
User Manual for NRSW version 4.4
Automatic File Configuration
HOME INTERFACES
System
Settings
Time & Region
Reboot
Authentication
User Accounts
Remote Authentication
Software Update
Software Update
Modem Firmware Update
Software Profiles
Configuration
File Configuration
Factory Configuration
Troubleshooting
Network Debugging
System Debugging
Tech Support
Keys & Certificates
Licensing
Legal Notice
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
This menu can be used to run an automatic configuration update of the system. It is configured as
follows:
Parameter
Status
Time of day
URL
ROUTING FIREWALL VPN SERVICES
File Configuration Automatic Updates
Automatic Updates
Status:
Time of day:
URL:
Apply
Figure 5.55.: Automatic File Configuration
Automatic File Configuration
Enable/disable an automatic configuration update
Time of day when the system should check for updates
The URL where the configuration file should be retrieved from (sup-
ported protocols are HTTP, HTTPS, TFTP, FTP)
178
SYSTEM
enabled
disabled
00:00
LOGOUT