Kb-Adl Optional Programming Keypad; Membrane Keypad; Meaning Of Leds - gefran installationSIEIDrive ADL300 Quick Start Up Manual, Specification And Installation

8.1.2 KB-ADL optional programming keypad

Drive status indicator LEDs

Membrane keypad

The optional programming keypad is used to display the status and diagnostics parameters during operation. It has
a strip of magnetic material on the back so that it can be attached to the front of the drive or other metal surface (e.g.
door of the electrical panel). The keypad can be used remotely from distances of up to 15 m. A 70 cm-long connection
cable is supplied as standard. Up to 5 sets of parameters can be saved using the KB-ADL keypad and sent to other
drives.
8.1.2.1 Membrane keypad
This section describes the keys on the membrane keypad and their functions
Symbol Reference
ESC Escape
SAVE Save
FIND Find
RST Reset
CUST Custom
DISP Display
E Enter

Up
 Down
 Left

Right

8.1.2.2 Meaning of LEDs

LEDs Colour
BRK Yellow
CNT Yellow
EN Green
ILIM Red
N=0 Yellow
AL Red
ADL300 • Quick installation guide - Specifications and connection
→
BRK CNT
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
05 LIFT
ESC
→
SAVE
FIND
Description
Returns to the higher level menu or submenu. Exits a parameter, a list of parameters, the list of the last 10 parameters and the
FIND function.
Can be used to exit a message that requires use of this.
Saves the parameters directly in the non-volatile memory without having to use 4.1 Save parameters
Enables the function for accessing a parameter using its number. To exit these functions, press the
Resets alarms, only if the causes have been eliminated.
Displays the last 10 parameters that have been modified. To exit these functions, press the
Displays a list of drive functioning parameters.
Enters the submenu or selected parameter, or selects an operation. It is used when modifying parameters to confirm the new
value that has been set.
Moves the selection up in a menu or list of parameters.
During modification of a parameter, increases the value of the digit under the cursor.
Moves the selection down in a menu or list of parameters.
During modification of a parameter, decreases the value of the digit under the cursor.
Returns to the higher level menu. During modification of a parameter, moves the cursor to the left.
Accesses the submenu or parameter selected. During modification of a parameter, moves the cursor to the right.
Meaning of LEDs
The LED is lit when the drive has activated the brake release command
The LED is lit when the drive has activated the close contactors command
The LED is lit during IGBT modulation (drive operating)
When this LED is lit the drive has reached a current limit condition. During normal functioning, this LED is off.
The LED is lit when motor speed is 0.
The LED is lit when the drive signals that an alarm has been triggered
EN ILim n=0 AL
←
5-line x 21 character alphanumerical LCD display
DISP
E
CUST
RST

key.

key.
67