Use Of The Keypad; Description Of Kb-Adl Optional Programming Keypad; Membrane Keypad; Meaning Of Leds - gefran VDL200 Series Quick Start Up Manual

8. Use of the keypad

This chapter describes the optional KB-ADL keypad and methods of use for displaying and programming inverter
parameters.

8.1 Description of KB-ADL optional programming keypad

The optional programming keypad is used to display the status and diagnostics parameters during operation. It has
a strip of magnetic material on the back so that it can be attached to the front of the drive or other metal surface (e.g.
door of the electrical panel). The keypad can be used remotely from distances of up to 15 m. A 70 cm-long connection
cable is supplied as standard. Up to 5 sets of parameters can be saved using the KB-ADL keypad and sent to other
drives.

8.1.1 Membrane keypad

This section describes the keys on the membrane keypad and their functions
Symbol
ESC
SAVE
FIND
RST
CUST
DISP
E





8.1.2 Meaning of LEDs

LEDs
BRK
CNT
EN
ILIM
N=0
AL
36
→
Drive status indicator LEDs
→
Membrane keypad
Reference Description
Returns to the higher level menu or submenu. Exits a parameter, a list of parameters, the list of the last 10 parameters and the
Escape FIND function.
Can be used to exit a message that requires use of this.
Save Saves the parameters directly in the non-volatile memory without having to use 4.1 Save parameters
Find
Enables the function for accessing a parameter using its number. To exit these functions, press the
Reset Resets alarms, only if the causes have been eliminated.
Custom Displays the last 10 parameters that have been modified. To exit these functions, press the
Display Displays a list of drive functioning parameters.
Enters the submenu or selected parameter, or selects an operation. It is used when modifying parameters to confirm the new
Enter
value that has been set.
Moves the selection up in a menu or list of parameters.
Up
During modification of a parameter, increases the value of the digit under the cursor.
Moves the selection down in a menu or list of parameters.
Down
During modification of a parameter, decreases the value of the digit under the cursor.
Left Returns to the higher level menu. During modification of a parameter, moves the cursor to the left.
Right Accesses the submenu or parameter selected. During modification of a parameter, moves the cursor to the right.
Colour Meaning of LEDs
Yellow The LED is lit when the drive has activated the brake release command
Yellow The LED is lit when the drive has activated the close contactors command
Green The LED is lit during IGBT modulation (drive operating)
Red When this LED is lit the drive has reached a current limit condition. During normal functioning, this LED is off.
Yellow The LED is lit when motor speed is 0.
Red The LED is lit when the drive signals that an alarm has been triggered
VDL200 • Quick installation guide - Specifications and connection
BRK CNT EN ILim n=0 AL
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
05 LIFT
ESC DISP
E
SAVE CUST
FIND RST
←
5-line x 21 character alphanumerical LCD display

key.

key.