Parameters On Selection Lists, But Not Displayed On Keypad - gefran SIEIDrive ADL300 Functions Description And Parameters List

PARAMETERS ON SELECTION LISTS, BUT NOT DISPLAYED ON KEYPAD

This list reports the parameters that are not displayed in the keyboard while they are part of the selection lists. These parameters
can be used as SOURCE of the input signals for the function block. (Refer to section A – Programming).
Menu PAR Description
- 262 Motor speed nofilter
This parameter indicates the unfiltered motor speed.
Menu PAR Description
- 362 Drive overload trip
This signal indicates that the drive is in the overload alarm condition.
Menu PAR Description
- 366 Drive overload 80%
This signal indicates that the drive has reached 80% of the thermal image accumulator (drive overload).
Menu PAR Description
- 626 Ramp ref out mon
This parameter displays the reference value output of the ramp remference function block.
Menu PAR Description
- 760 Ramp out mon
This parameter displays the reference value output of the ramp function block.
Menu PAR Description
- 764 Ramp acc state
This signal indicates whether the acceleration ramp is active.
Menu PAR Description
- 766 Ramp dec state
This signal indicates whether the deceleration ramp is active.
Menu PAR Description
- 934 Ref is 0
This signal is active when the reference is below the limit set in parameter 930 Reference 0 threshold.
Menu PAR Description
- 936 Ref is 0 delay
This parameter is active when the reference is below the threshold set in parameter 930 Reference 0 threshold. The
signal is enabled after the delay set with parameter 932 Reference delay 0.
Menu PAR Description
- 944 Speed is 0
This parameter is active when the speed is below the threshold set in parameter 940 Speed 0 threshold.
Menu PAR Description
- 946 Speed is 0 delay
This signal is active when the reference is below the threshold set in parameter 940 Speed 0 threshold. The signal is
activated after the delay set in parameter 942 Speed 0 delay.
Menu PAR Description
- 1060 Sequencer status
112
UM Type FB BIT
rpm INT16 16BIT
UM Type FB BIT
BIT 16BIT
UM Type FB BIT
BIT 16BIT
UM Type FB BIT
rpm INT16 16BIT
UM Type FB BIT
rpm INT16 16BIT
UM Type FB BIT
BIT 16BIT
UM Type FB BIT
BIT 16BIT
UM Type FB BIT
BIT 16BIT
UM Type FB BIT
BIT 16BIT
UM Type FB BIT
BIT 16BIT
UM Type FB BIT
BIT 16BIT
UM Type FB BIT
UINT16 16BIT
ADL300 • Functions description and parameters list
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Max Acc Mod
0 ER FVS
Max Acc Mod
1 ER FVS
Max Acc Mod
1 ER FVS
Max Acc Mod
0 ER FVS
Max Acc Mod
0 ER FVS
Max Acc Mod
1 ER FVS
Max Acc Mod
1 ER FVS
Max Acc Mod
1 ER FVS
Max Acc Mod
1 ER FVS
Max Acc Mod
1 ER FVS
Max Acc Mod
1 ER FVS
Max Acc Mod
0 ER FVS