Basic Operation; Setting Run Parameters - Thermo Scientific Sorvall WX100 Plus Instruction Manual

Basic Operation

WARNIN G
Do not incline or move the instrument while the rotor is spinning. Do not place any
object on the instrument or lean against the instrument.
The centrifuge itself may move if the rotor fails during high-speed rotation. Ensure that there
is a 30 cm area around the centrifuge that will allow for such movement and do not allow
individuals to enter that area during operation. Also do not place dangerous objects such as
flammable or explosive materials on top of the centrifuge or in the surrounding area.
C A UT I ON
Do not press the touchscreen with a sharp-pointed object such as a ballpoint pen.
If abnormal sounds or vibrations occur, immediately cease operation and contact an
authorized Thermo Fisher Scientific sales/service representative.

Setting Run Parameters

This section will describe the Run screen, the starting point for basic operations� For information on screens displayed during normal
operation and entering of run parameters, refer to section
Normal operation display
The screen for displaying run parameters and operating conditions is called the run screen�
SPEED, TIME and TEMP are displayed in two rows: The top row displays the current operating condition, while the bottom row displays
the set value�
The acceleration (ACCEL) and deceleration (DECEL) fields display set values�
Acceleration/ deceleration
display fields
Touchscreen and External Connection�
Figure 8: Run screen
Figure 8: Run Screen Page
26
Operating condition display
field
Setting value display field