Shifting Road And Reduced Speeds; Torque Multiplier; Indication Of The Multiplier Function - Zetor PROXIMA GP Series Operator's Manual

Shifting road and reduced speeds

H - road speeds
N - neutral
L - reduced speeds
Shifting of gears of the main gearbox with reduced speeds
is the same as with road speeds.
Considering low speed of the tractor, change nearly
always means moving off from rest.
Shifting using the lever of road and reduced
speeds is only possible when the tractor is in
standstill.

Torque multiplier

The two-speed multiplier is standard on all tractor types.
The shifting of gears of the two-speed multiplier is
controlled by two buttons on the main gearshift knob.
This is done by pressing the corresponding button without
pressing the clutch pedal. The actual shifting of the
multiplier speeds is automatic even if the tractor is loaded.
Torque multiplier gear shifting:
Arrow up - to increase ground speed
Arrow down - to decrease ground speed
Note:When the tractor engine is started or stopped,
a higher gear is always automatically engaged (arrow up).

Indication of the multiplier function

The individual engaged gears of the multiplier are
indicated by the symbol (1) on the instrument panel
display.
2 Higher gear (fast)
1 Lower gear (slow)
OPERATION
p18n060
PHS18N033
PHS18N034
83