Reduced And Road Gears Shift Lever; Gear Shifting Scheme - Zetor UTILIX CL Operator's Manual

Reduced and Road Gears Shift Lever

1. Road Gear Shift Lever
It is located on the right side of the driver's seat.
Shift gears with the clutch pedal depressed, both when the
tractor is stationary and when it moves.
2. Reduced Gears Shift Lever
The lever is located on the left side of the driver's seat.
Shift the gears when the clutch pedal is depressed only
when the tractor is stationary.

Gear shifting scheme

1. Road Gear Shift Lever
2. Reduced Gears Shift Lever
The main shift lever provides four speed ranges. The Sub shift lever provides four gear positions. The
Shuttle shift lever controls travel direction.
Use all three levers in different combinations to achieve Sixteen forward and Sixteen reverse speeds.
Always select the correct speed range and gear for the job.
Select the proper speed range and gear for the job.
The machine maybe operated in any gear with engine speeds at 950-2600 rpm. Within these limits,
the engine can be placed under varying load operations.
Never overload engine by lugging machine at low idle speeds.
Raise engine speed the match expected loads.If a slight increase engine rpm occurs simultaneously
with moving hand throttle lever forward,the engine is not overloaded.
When you leave the tractor, be sure to apply the parking brake and stop the engine.
The torque of wheel axle is extremely high while creep speed is being used. Be sure to step down on
the clutch pedal completely before applying the brakes, or they will not work.
When starting to operate the tractor, be sure to release the parking brakes. Misuse of the brakes may
cause damage to the transmission.
54
TRACTOR CONTROLS
UCL18N024
UCL18N025