ZOLL M2 Operator's Manual page 154

Chapter 12 Incident Data and Reports
Entering Information Using Alpha-numeric Keypad
Use the following procedure to enter information in the Wifi Setting and SFTP Setting
windows.
Note:
Note:
1. Rotate the Trim Knob to place the cursor in the field for which you want to enter
information, and press the knob. The keypad displays for that field.
Rotate the Trim knob to highlight the alpha/numeric key and press the knob to display the
2.
letters/numbers for that key at the top of the keypad.
Rotate the knob to highlight the number/letter selection, and press the knob to select it.
3.
Repeat steps 2 and 3 until you have selected all the numbers/letters for the field.
Rotate the knob to highlight the Enter key and press the knob to select it. The selected
4.
characters display in the field in the applicable window.
12-20
When a field requires a numeric entry, only numbers are available on the keypad.
If you don't use a format that is required by a field, the message INVALID INPUT!
displays.
www.zoll.com 9650-000860-01 Rev. C