Event Log - ZOLL M2 Operator's Manual

Chapter 12 Incident Data and Reports
Rotate the Trim Knob to highlight Print Incident and press the knob to select it. The ZOLL
5.
M2 unit prints the summary report for the incident you have selected.
When the Summary Report has finished printing, do one of the following:
6.
Rotate the Trim Knob to the X in the top right corner of the window and press the knob
•
to leave the window.
Press the Menu button
•
Caution You can print Summary Reports of previous incidents while monitoring/treating a new patient
during the current incident. Always use the time and date displayed on Summary Report
snapshots to verify that the printed data was recorded from the intended patient.
On the last event recorded, the unit prints "Summary Report Complete" on the bottom of the
stripchart.
Figure 12-1. Summary Report

Event Log

An Event Log is an abbreviated list of all events recorded in the summary report, beginning
with the rescue start time. You can print an event log that includes the following events and
their time of occurrence:
Presenting ECG (when power is turned on)
•
ECG Analysis (AED mode only)
•
Shock delivery
•
CHECK PATIENT alert is triggered
•
Mode Selector is turned to PACER (after entering Manual mode)
•
Patient alarm is triggered
•
Stripchart recorder is turned on
•
Code marker is entered
•
Diagnostic ECG (when quick access key is pressed)
•
12-4
to leave the window.
( )
www.zoll.com 9650-000860-01 Rev. C