Page 1
ZOLL M S ERIES ERVICE ANUAL Critical Care Transport (CCT) 5HY $...
Page 2
The issue date or revision level for this operation guide is shown on the front cover. ZOLL and M Series are trademarks of ZOLL Medical Corporation. 2002 by ZOLL Medical Corporation. All rights reserved.
Page 5
ZOLL Medical Corporation’s M Series Service Manual is intended for the service technician who identifies malfunctions and makes repairs at the subassembly level. Place this insert into the three-ring binder containing the M Series Service Manual and all other M Series option inserts.
Page 6
, a compatible ZOLL Battery Charging/Testing unit, or an M Series unit. Do not use the M Series unit in the presence of flammable agents (such as gasoline), oxygen-rich atmospheres, or flammable anesthetics. Using the unit near the site of a gasoline spill may cause an explosion.
• 5HWXUQLQJ D XQLW IRU VHUYLFH If you need to send the unit to ZOLL Medical Corporation for repair, you must obtain a service request (SR) number from the Technical Service representative. Units are available on loan while your unit is being repaired.
12 Lead PACER PACER RATE OUTPUT CHARGER ON CODE SUMMARY NIBP MARKER See the M Series CCT insert of the M Series Operator’s Guide for information on setting the trace display parameters. 5HY $ =2// 0 6HULHV 6HUYLFH 0DQXDO...
15-pin VGA connector. To conserve battery power, the VGA output port is not active at power-up. See the M Series CCT insert to the M Series Operator’s Guide for information on connecting the M Series CCT unit to an external display monitor.
• 5HFRUGLQJ \RXU UHVXOWV Photocopy the checklist at the back of the M Series Service Manual and use the copy to record the results of the maintenance tests. As you complete each step in a procedure, mark the appropriate Pass/Fail/NA box, and keep the checklist for your maintenance file. Complete all the steps of the procedure before evaluating the test results.
5$163257 9*$ 2XWSXW 7HVW The VGA Output test verifies that the VGA port on the front of the M Series CCT unit is operating properly and that information from the M Series CCT unit is displayed correctly on the connected monitor.
5HPRYLQJ WKH &&7 )URQW 3DQHO The M Series CCT unit has a specialized front panel that includes a VGA output connector and a larger LCD screen. This procedure is similar to the procedure for removing the front panel from a standard M Series unit.
Page 14
&&7 5,7,&$/ 5$163257 3URFHGXUH Follow these steps to remove the front panel from the M Series CCT unit. Step Action 5HPRYH WKH WRS FRYHU RI WKH IURQW SDQHO E\ JHQWO\ LQVHUWLQJ D IODW EODGH VFUHZGULYHU LQWR WKH QRWFK DW WKH EDFN...
Page 15
To reinstall the CCT front panel reverse Steps 1 through 7 of the above disassembly procedure. Note: The M Series CCT front panel will only function with an M Series CCT main assembly. It will not function with an M Series main assembly.
5,7,&$/ 5$163257 5HSODFHPHQW 3DUWV You can order replacement parts through an authorized ZOLL distributor or directly from ZOLL Medical Corporation. Pricing information is available from ZOLL Medical Corporation’s Technical Service Department. Note: ZOLL reserves the right to substitute different parts to reflect modifications and improvements in ZOLL M Series circuitry and design.
Need help?
Do you have a question about the M Series and is the answer not in the manual?
Questions and answers