Warning Table; Warnings - Canon iPF6100 Service Manual

Chapter 8

8.2 Warning Table

8.2.1 Warnings

iPF6100
* Codes represent the numbers that are displayed in DISPLAY in service mode and that are recorded in PRINTINF. Messages that are not accompanied by a code
indication are not logged.
Display massage
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Ink Level: Check
Problem with
Printhead L
Chk printing results
Problem with
Printhead R
Chk printing results
Problem with
Printhead L/R
Chk printing results
Prepare for
maint cart
replacement.
Prepare for parts
replacement.
Call for service.
Parts replacement
time has passed.
Call for service.
GARO W1221
GARO W1222
GARO W1223
GARO W1225
GARO W1226
GARO W1231
GARO W1232
GARO W1233
GARO W1234
GARO W1235
End of paper feed.
Cannot feed
paper more.
8-2
Code*
0180104-1000 BK ink tank near-empty
0180101-1001 Y ink tank near-empty
0180102-1002 M ink tank near-empty
0180103-1003 C ink tank near-empty
0180112-1004 PM ink tank near-empty
0180113-1005 PC ink tank near-empty
0180106-1006 MBK ink tank near-empty
0180106-1007 MBK2 ink tank near-empty
01810105-1008 GY ink tank near-empty
01810115-1009 PGY ink tank near-empty
01810107-100A R ink tank near-empty
01810109-100B B ink tank near-empty
01810108-100C G ink tank near-empty
01800500-1010 Number of non-discharging nozzles in
printhead L: Warning level
01800500-1010 Number of non-discharging nozzles in
printhead R: Warning level
01800500-1010 Number of non-discharging nozzles in both
printheads: Warning level
01841001-1100 Maintenance cartridge near-full
Parts counter W1 level
Parts counter W2 level
01341221-1030 GARO (image mode): Unknown command Verify the transmitted data before reprinting.
01341222-1031 GARO (image mode): Invalid parameter
count (no parameters)
01341223-1032 GARO (image mode): Required parameter
missing
01341225-1034 GARO (image mode): Other warning
01341226-103A GARO (image mode): Image processing
table error
01341231-1035 GARO (setup): Unknown command
01341232-1036 GARO (setup): Invalid parameter count
01341233-1037 GARO (setup): Required parameter
missing
01341234-1038 GARO (setup): Data out of bounds
01341235-1039 GARO (setup): Other warning
Forced feed limit
T-8-2
Condition detected
Renew the ink tanks.
Clean the printheads. Renew the printheads. Identify the
head management sensor unit.
Replace the maintenance cartridge.
Check the parts counter in service mode.
After checking the parts counter in service mode, replace
any part whose counter is nearing the error value.
Check the remaining quantity of roll media.
Action
0012-7907