1) To remove the upper cover, remove left/right circle covers (L), left/right circle covers (S), left/right side covers, upper left/right covers, left/right rear covers,

right cover unit and upper rear cover.

2) Remove upper cover [2] while opening left/right arm stays [1] outward one by one.

m) Release lever

Removing the release lever

1) To remove release lever [1], remove the purge unit and then remove the release lever. To do so, keep pinch roller [2] pressurized to ease the work of phase

alignment during gear installation.

Reinstalling the release lever

1) To install the release lever, align the gear of the release lever with mark [3] (phase) in the receiving gear.

[1]

[2]

[1]

[2]

F-4-22

F-4-23

Chapter 4

[1]

[3]